China best Screw Conveyor for Coal, Sand, Silo with Hot selling

Product Description

1.Product Details

 

1.Advantages Of Screw Conveyor:

 

1.Using high quality steel pipe, the overall rigidity is good.
2.Double pitch blade to reduce the degree of compression in material transportation .
3.It adopts high-quality reducer and heavy-duty design. It has the characteristics of large turning distance and low noise.
4.Universal ball connection is optional to facilitate installation, adjustment and steeling.
5.Equipped with medium suspension bearings and tail bearings of good quality, and easy to install.
6.Adequate spare parts, complete specifications.
7.Commonly used diameter 165,219,273,323,407 large stock,size and angle can be customized according to customer requirements.
8.Standard components, easy to transport.
9.One-time forming of spiral blade,double pitch design ,never plugging.

 

1.Simple structure, good sealing, easy operation and low power invest cost. 
2.It has the features of small screw diameter, high rotation speed and large capacity, specially suitable for inclined transport. The angle is up to 60 degree. 
3.Widely used in chemical, metallurgy, paper making, and construction industries, etc. 
4.Axle head and conveying spiral adopt spline connection, with features of convenient mounting&disassembling, large load capacity and stability. 
5.All sections of screw conveyor are connected with flange. Also screw blades are integral connection. 
6.Inlet and outlet chutes have many kinds of connections, such as flange, sack, universal joint, etc.

2.Our Company’s Product:

Reducer: an independent part composed of gear drive, worm drive and gear – worm drive enclosed in a rigid shell. It plays the role of matching speed and transferring torque between prime mover and working machine or actuator. It is a kind of relatively precise machinery. The purpose of using it is to reduce the speed and increase the torque. 

Shaft-end Seal: With multi-shaft-end seal in shaft end and avoids cement&mud approaching to shaft end to extend service life of the concrete mixer.
Discharging Device: Hydralic discharging system,with strong drive force and reliable discharging.Discharging door can be opened at any angle,with manual discharging function.The discharging door adopts detachable structure which is convenient for maint.
 

Shaft end seal:Separate seal and bearing, more stable operation, better maintenance, easy replacement, and maintenance;
Discharge mechanism:unloading door is made by tooling and then processed by lathe to eliminate the phenomenon of Carmen; Hydraulic discharge, stable operation.

 

 

2.Company Profile

MAHangZhou CZPT METALLURGICAL MACHINE CO.,LTD. is located in the famous steel city HangZhou City, rich iron and steel resources for the development of my company provides a unique advantage, the company is the production and research of various wear-resistant, heat-resistant, shock-resistant alloy castings professional manufacturers; business is characterized by fine, special, unique. Products to the market economy needs throughout the country, each year more than 5,000 tons of various casting products in metallurgical machinery, construction, cement, transportation and other industries widely used. This product its unique properties of various materials to resist wear and tear on the product, as many national key projects of qualified suppliers.

3.Packaging & Delivery

Quick delivery and high efficiency.
Use reinforced packaging for important electronic accessories and wearing parts.
We will carefully calculate the type of space and cabinet needed to minimize the cost to buyers and help them save money.
Port: HangZhou, ZheJiang , ZheJiang , HangZhou, HangZhou

4.Service

Technical files service provided.
Spare parts replacement and repair service provided.
Our Products can be customized according to clients’ different requirement.
Technical support online service provided.

5.After-sale Service

May enjoy the life-long service and technical consultation after you buy our products.
Certain quantity stochastic tool will be provided while delivering goods.
Within 48 hours service will be available according to different regions after received the telephone.
The time of warranty is for a whole year
Promptly provides the fittings according to users’ demands, handles for the user consigns for shipment.
Provides the technology advisory service as necessary.
Please contact me when you have any problems with the plant.

6.Contact

 

 

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.

China best Screw Conveyor for Coal, Sand, Silo     with Hot sellingChina best Screw Conveyor for Coal, Sand, Silo     with Hot selling