Product Description

2 seat low speed leisure car electric ulitity pickup
4×2 lowspeed electric pickup truck/ Electric truck/ electric vehicle/ electric car

Product parameters

Product details

 (The actual specification and size are not limited to the above figure, it shall be made based on the customers’ requirements.)
Material
  2.1 Body: Electric truck shell adopts thickening choice steel production
  2.2 Chassis:Integral steel frame construction and suspension components treated with rust resistant.
3.Advantage::Less noise and zero emissions, only 1USD energy cost per 150km, energy efficiency performance, driver comfort, delivering reliability, low maintenance costs, suit every intensive or light operation.
4.Application: Warehouse, express, market, transport cargo and passengers in country and city, etc.
Technical Advantages
1)  The chassis system is designed as trapezoidal structure with high strength and high safety factor based on the standards for freight vehicle; the structure has high reliability and is simple to manufacturer; and it is easy to guarantee the processing requirements.
2)  The rear axle, which is advanced electronic electric axle jointly developed and designed by our company and the technology center has full-floating mechanism and is featured by high transmission efficiency, low noise, no leakage and stable speed changing. The input shaft of rear axle and output shaft of motor are connected via involute spline and there is no drifting clearance; the transferred torque is large, which guarantees the good drive performance of the complete vehicle.
3)  The electric control system, which is U.S. advanced INBOER electric control system, has good under-voltage and over-current protection capability, temperature control, speed regulation, current regulation and vehicle dynamic monitoring capability, as well as high intelligence degree. It is the excellent product that fills the domestic and foreign blank.
4)  The patented appearance design is fashionable and has smooth line; it meets the principle of aerodynamics; the   driving resistance of vehicle is reduced and the driving distance is prolonged. 
5)  The high-efficiency and sensitive double-pipeline hydraulic braking system makes the vehicle more safe and reliable. 
6)  The newly designed adjustable push-pull battery box makes the battery maintenance t more convenient.
Certifications

Company information
We’re 1 professional manufacturer which refitting special truck and trailer in China, established in 1969, more than 40 yrs producing experience, a growing enterprise with endless innovations and development. Our corporation mainly specializes in the various semi trailers and special vehicle related business, such as dump truck, tanker trailer, concrete mixer truck, and etc. Also, our business line ranges from the research, development, and design to the manufacture and sales for other automobile accessories, especially for axles and hydraulic cylinders. We’re one of the earliest company to get the approval of the ISO, CCC and Compulsory Product Certification Enterprises. We have exported more than 30 countries from 2005.Looking forward to your visiting or calling.

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.