China supplier Rd160 Rd161 Air Locker Differential for Land Rover Spline 24 near me factory

Product Description

Product Name Off Road Parts & Accessories HF Air Locker Differential 
Material High Quality Stainless Steel
Color Sliver
Style 4×4 Accessories Differential Air Locking RD160 RD161 
Car Model 4×4 Off Road Vehicals
Installation With All Fittings,with install guide
Type 4×4 Off Road Accessories,4×4 Aftermarket Parts & Accessories
Packing Netrual Packing,1 sets per carton
Delivery Time If in stock,3-5 days after received payment; If large order, within 25 days
Description GZDL4WD 4×4 Accessories Air Locker Differential RD160 RD160 24 Spline

HF Part No. Description Splines Ratio Superseded Part #(s)
RD05 CZPT 8″,RR,28 SPL 28 All
RD12 GM 12 Bolt,8.9″,30 SPL,3.73 & UP 30 3.73 & UP
RD40 GM 14 Bolt,9.5″,C-clip 33 All
RD46 CZPT 9″,RR,28 SPL 28 All RD25
RD90 CZPT 7.5″ IFS 27 All
RD93 Chrysler 8.25″,29 SPL 29 All
RD100 Dana 30,27 SPL,3.73 & UP 27 3.73 & UP RD30
RD101 Dana 30,27 SPL,3.54 & DN 27 3.54 & DN RD31
RD102 Dana 35,27 SPL,3.54 & UP 27 3.54 & UP RD49,RD59,RD69
RD103 Dana 35,27 SPL,3.31 & DN 27 3.31 & DN RD48,RD58,RD68
RD104 Dana 30,30 SPL,3.73 & UP 30 3.73 & UP
RD105 Dana 35,30 SPL,3.54 & UP 30 3.54 & UP
RD109 Dana 44,35 SPL,3.92 & UP 35 3.92 & UP
RD110 CZPT IFS,28 SPL 28 All
RD111 CZPT 8″ IFS,53mm BRNG 30 3.91 & UP
RD112 Chrysler 8.25″,27 SPL 27 All
RD113 Dana 44,33 SPL,3.92 & UP 33 3.92 & UP
RD116 Dana 44,30 SPL,3.92 & UP 30 3.92 & UP RD06
RD117 Dana 44,30 SPL,3.73 & DN 30 3.73 & DN RD07
RD121 CZPT 8″ IFS,53mm BRNG 30 3.73 & DN
RD125 Dana 35,non C-clip,30 SPL,3.54 & UP 30 3.54 & UP
RD127 Land Rover,10 SPL,Banjo 10 3.54 RD03
RD128 Land Rover,24 SPL,Banjo 24 All RD56
RD129 CZPT Tacoma,RR 30 All RD89
RD131 CZPT 8″ IFS,50mm BRNG 30 All RD92
RD132 CZPT 8″,50mm BRNG 30 All RD01,RD23
RD133 CZPT 8″,RR,shim adjusted 30 All
RD134 Nissan H233,31 SPL 31 All RD04
RD135 Nissan H233B,33 SPL 33 All RD17,RD24
RD136 Nissan H233B,31 SPL 31 All RD09,RD78,RD78A
RD138 Land Rover,24 SPL,Banjo,P38A 24 All RD57
RD141 CZPT 8″ IFS,34 SPL 34 All
RD142 CZPT 8.9″,50mm BRNG 30 All RD02,RD33
RD143 Dana 44,32 SPL,3.73 & DN 32 3.73 & DN
RD146 CZPT 10.5″,36 SPL,RR 36 All
RD147 Dana 44,35 SPL,3.73 & DN 35 3.73 & DN
RD148 AAM 760,28 SPL,IFS 28 All
RD152 CZPT 9.5″ ,32SPL 32 All
RD153 CZPT 8.9″,C-clip,50mm BRNG 30 All RD08,RD124
RD154 CZPT 9.5″,31 SPL,LIVE AXLE 31 All
RD155 CZPT 9.5″,33 SPL,IRS 33 All
RD156 Hyundai 9.5″,34 SPL,LIVE AXLE 34 All
RD160 Land Rover,Salisbury,4.70:1 24 4.7 RD32
RD161 Land Rover,Salisbury,3.54:1 24 3.54 RD20
RD162 Dana 60,30 SPL,4.56 & UP 30 4.56 & UP RD21
RD163 Dana 60,30 SPL,4.10 & DN 30 4.10 & DN RD22
RD164 Dana 60,32 SPL,4.56 & UP 32 4.56 & UP RD95
RD165 Dana 60,32 SPL,4.10 & DN 32 4.10 & DN RD96
RD166 Dana 60HD,35 SPL,4.56 & UP 35 4.56 & UP RD35



Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: Western Union, Paypal ,T/T,100% before delivery. We’ll show you the photos of the products and packagesbefore you pay the balance.

Q3. What is your terms of delivery?

Q4. How about your delivery time?
A: Generally, If in stock,3-5 work days will be delivery.If for large order,it will take 20 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost andthe courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Contact Info:


What Are the Advantages of a Splined Shaft?

If you are looking for the right splined shaft for your machine, you should know a few important things. First, what type of material should be used? Stainless steel is usually the most appropriate choice, because of its ability to offer low noise and fatigue failure. Secondly, it can be machined using a slotting or shaping machine. Lastly, it will ensure smooth motion. So, what are the advantages of a splined shaft?
Stainless steel is the best material for splined shafts

When choosing a splined shaft, you should consider its hardness, quality, and finish. Stainless steel has superior corrosion and wear resistance. Carbon steel is another good material for splined shafts. Carbon steel has a shallow carbon content (about 1.7%), which makes it more malleable and helps ensure smooth motion. But if you’re not willing to spend the money on stainless steel, consider other options.
There are 2 main types of splines: parallel splines and crowned splines. Involute splines have parallel grooves and allow linear and rotary motion. Helical splines have involute teeth and are oriented at an angle. This type allows for many teeth on the shaft and minimizes the stress concentration in the stationary joint.
Large evenly spaced splines are widely used in hydraulic systems, drivetrains, and machine tools. They are typically made from carbon steel (CR10) and stainless steel (AISI 304). This material is durable and meets the requirements of ISO 14-B, formerly DIN 5463-B. Splined shafts are typically made of stainless steel or C45 steel, though there are many other materials available.
Stainless steel is the best material for a splined shaft. This metal is also incredibly affordable. In most cases, stainless steel is the best choice for these shafts because it offers the best corrosion resistance. There are many different types of splined shafts, and each 1 is suited for a particular application. There are also many different types of stainless steel, so choose stainless steel if you want the best quality.
For those looking for high-quality splined shafts, CZPT Spline Shafts offer many benefits. They can reduce costs, improve positional accuracy, and reduce friction. With the CZPT TFE coating, splined shafts can reduce energy and heat buildup, and extend the life of your products. And, they’re easy to install – all you need to do is install them.

They provide low noise, low wear and fatigue failure

The splines in a splined shaft are composed of 2 main parts: the spline root fillet and the spline relief. The spline root fillet is the most critical part, because fatigue failure starts there and propagates to the relief. The spline relief is more susceptible to fatigue failure because of its involute tooth shape, which offers a lower stress to the shaft and has a smaller area of contact.
The fatigue life of splined shafts is determined by measuring the S-N curve. This is also known as the Wohler curve, and it is the relationship between stress amplitude and number of cycles. It depends on the material, geometry and way of loading. It can be obtained from a physical test on a uniform material specimen under a constant amplitude load. Approximations for low-alloy steel parts can be made using a lower-alloy steel material.
Splined shafts provide low noise, minimal wear and fatigue failure. However, some mechanical transmission elements need to be removed from the shaft during assembly and manufacturing processes. The shafts must still be capable of relative axial movement for functional purposes. As such, good spline joints are essential to high-quality torque transmission, minimal backlash, and low noise. The major failure modes of spline shafts include fretting corrosion, tooth breakage, and fatigue failure.
The outer disc carrier spline is susceptible to tensile stress and fatigue failure. High customer demands for low noise and low wear and fatigue failure makes splined shafts an excellent choice. A fractured spline gear coupling was received for analysis. It was installed near the top of a filter shaft and inserted into the gearbox motor. The service history was unknown. The fractured spline gear coupling had longitudinally cracked and arrested at the termination of the spline gear teeth. The spline gear teeth also exhibited wear and deformation.
A new spline coupling method detects fault propagation in hollow cylindrical splined shafts. A spline coupling is fabricated using an AE method with the spline section unrolled into a metal plate of the same thickness as the cylinder wall. In addition, the spline coupling is misaligned, which puts significant concentration on the spline teeth. This further accelerates the rate of fretting fatigue and wear.
A spline joint should be lubricated after 25 hours of operation. Frequent lubrication can increase maintenance costs and cause downtime. Moreover, the lubricant may retain abrasive particles at the interfaces. In some cases, lubricants can even cause misalignment, leading to premature failure. So, the lubrication of a spline coupling is vital in ensuring proper functioning of the shaft.
The design of a spline coupling can be optimized to enhance its wear resistance and reliability. Surface treatments, loads, and rotation affect the friction properties of a spline coupling. In addition, a finite element method was developed to predict wear of a floating spline coupling. This method is feasible and provides a reliable basis for predicting the wear and fatigue life of a spline coupling.

They can be machined using a slotting or shaping machine

Machines can be used to shape splined shafts in a variety of industries. They are useful in many applications, including gearboxes, braking systems, and axles. A slotted shaft can be manipulated in several ways, including hobbling, broaching, and slotting. In addition to shaping, splines are also useful in reducing bar diameter.
When using a slotting or shaping machine, the workpiece is held against a pedestal that has a uniform thickness. The machine is equipped with a stand column and limiting column (Figure 1), each positioned perpendicular to the upper surface of the pedestal. The limiting column axis is located on the same line as the stand column. During the slotting or shaping process, the tool is fed in and out until the desired space is achieved.
One process involves cutting splines into a shaft. Straddle milling, spline shaping, and spline cutting are 2 common processes used to create splined shafts. Straddle milling involves a fixed indexing fixture that holds the shaft steady, while rotating milling cutters cut the groove in the length of the shaft. Several passes are required to ensure uniformity throughout the spline.
Splines are a type of gear. The ridges or teeth on the drive shaft mesh with grooves in the mating piece. A splined shaft allows the transmission of torque to a mate piece while maximizing the power transfer. Splines are used in heavy vehicles, construction, agriculture, and massive earthmoving machinery. Splines are used in virtually every type of rotary motion, from axles to transmission systems. They also offer better fatigue life and reliability.
Slotting or shaping machines can also be used to shape splined shafts. Slotting machines are often used to machine splined shafts, because it is easier to make them with these machines. Using a slotting or shaping machine can result in splined shafts of different sizes. It is important to follow a set of spline standards to ensure your parts are manufactured to the highest standards.
A milling machine is another option for producing splined shafts. A spline shaft can be set up between 2 centers in an indexing fixture. Two side milling cutters are mounted on an arbor and a spacer and shims are inserted between them. The arbor and cutters are then mounted to a milling machine spindle. To make sure the cutters center themselves over the splined shaft, an adjustment must be made to the spindle of the machine.
The machining process is very different for internal and external splines. External splines can be broached, shaped, milled, or hobbed, while internal splines cannot. These machines use hard alloy, but they are not as good for internal splines. A machine with a slotting mechanism is necessary for these operations.

China supplier Rd160 Rd161 Air Locker Differential for Land Rover Spline 24     near me factory China supplier Rd160 Rd161 Air Locker Differential for Land Rover Spline 24     near me factory