Tag Archives: swc cardan shaft

China Good quality SWC Series Cardan Shaft for Sale with High Quality with Free Design Custom

Product Description

SWC Series-Medium-Duty Designs Cardan shaft

Designs

Data and Sizes of SWC Series Universal Joint Couplings

Type Design
Data
Item		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1571 1130 1340 1400 1520
M(kg) 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg) 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg) 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg) 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
Tn(kN·m) 16 22.4 31.5 40 63 80 90 125 180 250 355 500 710 1000
TF(kN·m) 8 11.2 16 20 31.5 40 45 63 90 125 180 250 355 500
Β(°) 15 15 15 15 15 15 15 15 15 15 15 15 15 15
D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
D2(H9) 100 105 120 135 150 160 170 185 210 235 255 275 320 380
D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
G 6.0 7.0 9.0 9.0 12.5 12.5 12.5 15.0 16.0 18.0 20.0 22.5 22.5 25
MI(Kg) 2.57 3 3.85 3.85 5.17 6 6.75 8.25 10.6 13 18.50 23.75 29.12 38.08
Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
Tightening torque(Nm) 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

1. Notations: 
L=Standard length, or compressed length for designs with length compensation; 
LV=Length compensation; 
M=Weight; 
Tn=Nominal torque(Yield torque 50% over Tn); 
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads; 
β=Maximum deflection angle; 
MI=weight per 100mm tube
2. Millimeters are used as measurement units except where noted; 
3. Please consult us for customizations regarding length, length compensation and
Flange connections. 
(DIN or SAT etc. )

 

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are 2 common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only 6 bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, 3 spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Good quality SWC Series Cardan Shaft for Sale with High Quality with Free Design CustomChina Good quality SWC Series Cardan Shaft for Sale with High Quality with Free Design Custom

China OEM SWC Cardan Shaft and Cardan Shaft Parts for Motor Drive Industrial Equipments with Free Design Custom

Product Description

SWC Cardan shaft and cardan shaft parts for motor drive industrial equipments

Product Description
 

structure universal Flexible or Rigid Rigid Standard or Nonstandard Nonstandard
Material Alloy steel Brand name HangZhou XIHU (WEST LAKE) DIS. Place of origin ZheJiang ,China
Model SWC Raw materials heat treatment Length depend on model
Flange DIA depend on model Nominal torque depend on model coating heavy duty industrial paint
Paint clour customization Application Motor drive equipment OEM/ODM Available
Certification ISO,TUV,SGS Price calculate according to model Custom service Available

Packaging & Delivery

Packaging details:Standard plywood case

Delivery detail: 15 -20 working days,depend on the actual produce condition

 

FAQ

Q1: What is the location of your company?

A1: Our company is located in the HangZhou City ,ZheJiang ,China.Welcome to visit our factory at anytime!

 

Q2: How does your factory do regarding quality control?

A2: Our standard QC system to control quality.

 

Q3: What is your delivery time?

A3: Usually within 25 days after the receipt of payment.Delivery time must depend on the actual produce condition.

 

Q4: What are your strengths?

A4: 1.We are the manufacturer,having competitive advantage in price.

 

2.A large part of money is put into advancing CNC equipments and product

R&D department annual,the performance of cardan shaft can be guaranteed.

 

3.About quality issues or follow-up after-sales service,we report directly to the boss.

 

4.We have the ambitions to exploring and developing the world’s cardan shaft market and

we believe we can.

 

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.

China OEM SWC Cardan Shaft and Cardan Shaft Parts for Motor Drive Industrial Equipments with Free Design CustomChina OEM SWC Cardan Shaft and Cardan Shaft Parts for Motor Drive Industrial Equipments with Free Design Custom

China manufacturer High Performance SWC350d-2250 High Quality SWC China Leading Cardan Shaft near me supplier

Product Description

 High Performance SWC350D-2250 High Quality SWC China Leading Cardan Shaft

Product Description
 

structure Type D Flexible or Rigid Rigid Standard or Nonstandard Nonstandard
Materia Alloy steel Brand name HangZhou XIHU (WEST LAKE) DIS. Place of origin ZheJiang ,China
Model SWC350D-2250 Raw materials heat treatment Length 2250mm
Flange DIA 350mm Nominal torque 225KN.m coating heavy duty industrial paint
Paint clour customization Application Industrial  machinery OEM/ODM Available
Certification ISO,TUV,SGS Price calculate according to model Custom service Available

Packaging & Delivery

Packaging details:Standard plywood case

Delivery detail: 15 -20 working days,depend on the actual produce condition

FAQ

Q: Are you trading company or manufacturer ?
A: We  are  a  professional  manufacturer specializing  in  manufacturing cardan  shafts. We supply cardan shafts for the wholesalers , dealers  and end-users from different countries. 
 
Q: Can you do OEM? And what is your min order ?
A: Yes, absolutely. Generally, min order is1 set.  Most of our products are Customized. Each order from our factory, we always produce cardan shaft after customer confirmed the drawing. So we didn’t have stock.
 
Q: How does your factory do regarding quality control?
A:Quality is priority! We always attach great importance to quality controlling from the very beginning to the  end:
1) Firstly, we have QC department to control the quality
2) Secondly, we have all detailed records for nonconformity products, then we will make summary according to these records, avoid it happen again.
3) Thirdly,In order to meet world-class quality standards strict requirements, we passed the SGS, TUV product certification.
4)Fourthly,Have first-class production equipment, including CNC Machines and machining center.

 

Analytical Approaches to Estimating Contact Pressures in Spline Couplings

A spline coupling is a type of mechanical connection between 2 rotating shafts. It consists of 2 parts – a coupler and a coupling. Both parts have teeth which engage and transfer loads. However, spline couplings are typically over-dimensioned, which makes them susceptible to fatigue and static behavior. Wear phenomena can also cause the coupling to fail. For this reason, proper spline coupling design is essential for achieving optimum performance.
splineshaft

Modeling a spline coupling

Spline couplings are becoming increasingly popular in the aerospace industry, but they operate in a slightly misaligned state, causing both vibrations and damage to the contact surfaces. To solve this problem, this article offers analytical approaches for estimating the contact pressures in a spline coupling. Specifically, this article compares analytical approaches with pure numerical approaches to demonstrate the benefits of an analytical approach.
To model a spline coupling, first you create the knowledge base for the spline coupling. The knowledge base includes a large number of possible specification values, which are related to each other. If you modify 1 specification, it may lead to a warning for violating another. To make the design valid, you must create a spline coupling model that meets the specified specification values.
After you have modeled the geometry, you must enter the contact pressures of the 2 spline couplings. Then, you need to determine the position of the pitch circle of the spline. In Figure 2, the centre of the male coupling is superposed to that of the female spline. Then, you need to make sure that the alignment meshing distance of the 2 splines is the same.
Once you have the data you need to create a spline coupling model, you can begin by entering the specifications for the interface design. Once you have this data, you need to choose whether to optimize the internal spline or the external spline. You’ll also need to specify the tooth friction coefficient, which is used to determine the stresses in the spline coupling model 20. You should also enter the pilot clearance, which is the clearance between the tip 186 of a tooth 32 on 1 spline and the feature on the mating spline.
After you have entered the desired specifications for the external spline, you can enter the parameters for the internal spline. For example, you can enter the outer diameter limit 154 of the major snap 54 and the minor snap 56 of the internal spline. The values of these parameters are displayed in color-coded boxes on the Spline Inputs and Configuration GUI screen 80. Once the parameters are entered, you’ll be presented with a geometric representation of the spline coupling model 20.

Creating a spline coupling model 20

The spline coupling model 20 is created by a product model software program 10. The software validates the spline coupling model against a knowledge base of configuration-dependent specification constraints and relationships. This report is then input to the ANSYS stress analyzer program. It lists the spline coupling model 20’s geometric configurations and specification values for each feature. The spline coupling model 20 is automatically recreated every time the configuration or performance specifications of the spline coupling model 20 are modified.
The spline coupling model 20 can be configured using the product model software program 10. A user specifies the axial length of the spline stack, which may be zero, or a fixed length. The user also enters a radial mating face 148, if any, and selects a pilot clearance specification value of 14.5 degrees or 30 degrees.
A user can then use the mouse 110 to modify the spline coupling model 20. The spline coupling knowledge base contains a large number of possible specification values and the spline coupling design rule. If the user tries to change a spline coupling model, the model will show a warning about a violation of another specification. In some cases, the modification may invalidate the design.
In the spline coupling model 20, the user enters additional performance requirement specifications. The user chooses the locations where maximum torque is transferred for the internal and external splines 38 and 40. The maximum torque transfer location is determined by the attachment configuration of the hardware to the shafts. Once this is selected, the user can click “Next” to save the model. A preview of the spline coupling model 20 is displayed.
The model 20 is a representation of a spline coupling. The spline specifications are entered in the order and arrangement as specified on the spline coupling model 20 GUI screen. Once the spline coupling specifications are entered, the product model software program 10 will incorporate them into the spline coupling model 20. This is the last step in spline coupling model creation.
splineshaft

Analysing a spline coupling model 20

An analysis of a spline coupling model consists of inputting its configuration and performance specifications. These specifications may be generated from another computer program. The product model software program 10 then uses its internal knowledge base of configuration dependent specification relationships and constraints to create a valid three-dimensional parametric model 20. This model contains information describing the number and types of spline teeth 32, snaps 34, and shoulder 36.
When you are analysing a spline coupling, the software program 10 will include default values for various specifications. The spline coupling model 20 comprises an internal spline 38 and an external spline 40. Each of the splines includes its own set of parameters, such as its depth, width, length, and radii. The external spline 40 will also contain its own set of parameters, such as its orientation.
Upon selecting these parameters, the software program will perform various analyses on the spline coupling model 20. The software program 10 calculates the nominal and maximal tooth bearing stresses and fatigue life of a spline coupling. It will also determine the difference in torsional windup between an internal and an external spline. The output file from the analysis will be a report file containing model configuration and specification data. The output file may also be used by other computer programs for further analysis.
Once these parameters are set, the user enters the design criteria for the spline coupling model 20. In this step, the user specifies the locations of maximum torque transfer for both the external and internal spline 38. The maximum torque transfer location depends on the configuration of the hardware attached to the shafts. The user may enter up to 4 different performance requirement specifications for each spline.
The results of the analysis show that there are 2 phases of spline coupling. The first phase shows a large increase in stress and vibration. The second phase shows a decline in both stress and vibration levels. The third stage shows a constant meshing force between 300N and 320N. This behavior continues for a longer period of time, until the final stage engages with the surface.
splineshaft

Misalignment of a spline coupling

A study aimed to investigate the position of the resultant contact force in a spline coupling engaging teeth under a steady torque and rotating misalignment. The study used numerical methods based on Finite Element Method (FEM) models. It produced numerical results for nominal conditions and parallel offset misalignment. The study considered 2 levels of misalignment – 0.02 mm and 0.08 mm – with different loading levels.
The results showed that the misalignment between the splines and rotors causes a change in the meshing force of the spline-rotor coupling system. Its dynamics is governed by the meshing force of splines. The meshing force of a misaligned spline coupling is related to the rotor-spline coupling system parameters, the transmitting torque, and the dynamic vibration displacement.
Despite the lack of precise measurements, the misalignment of splines is a common problem. This problem is compounded by the fact that splines usually feature backlash. This backlash is the result of the misaligned spline. The authors analyzed several splines, varying pitch diameters, and length/diameter ratios.
A spline coupling is a two-dimensional mechanical system, which has positive backlash. The spline coupling is comprised of a hub and shaft, and has tip-to-root clearances that are larger than the backlash. A form-clearance is sufficient to prevent tip-to-root fillet contact. The torque on the splines is transmitted via friction.
When a spline coupling is misaligned, a torque-biased thrust force is generated. In such a situation, the force can exceed the torque, causing the component to lose its alignment. The two-way transmission of torque and thrust is modeled analytically in the present study. The analytical approach provides solutions that can be integrated into the design process. So, the next time you are faced with a misaligned spline coupling problem, make sure to use an analytical approach!
In this study, the spline coupling is analyzed under nominal conditions without a parallel offset misalignment. The stiffness values obtained are the percentage difference between the nominal pitch diameter and load application diameter. Moreover, the maximum percentage difference in the measured pitch diameter is 1.60% under a torque of 5000 N*m. The other parameter, the pitch angle, is taken into consideration in the calculation.

China manufacturer High Performance SWC350d-2250 High Quality SWC China Leading Cardan Shaft near me supplier China manufacturer High Performance SWC350d-2250 High Quality SWC China Leading Cardan Shaft near me supplier

China wholesaler China SWC Cardan Shaft with Free Design Custom

Product Description

SWC-I Series-Light-Duty Designs Cardan shaft
Designs

Data and Size of SWC-I Series Universal Joint Couplings

1. Notations: 
L=Standard length, or compressed length for designs with length compensation; 
LV=Length compensation; 
M=Weight; 
Tn=Nominal torque(Yield torque 50% over Tn); 
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads; 
β=Maximum deflection angle; 
MI=weight per 100mm tube
2. Millimeters are used as measurement units except where noted; 
3. Please consult us for customizations regarding length, length compensation and
Flange connections. 

The Benefits of Spline Couplings for Disc Brake Mounting Interfaces

Spline couplings are commonly used for securing disc brake mounting interfaces. Spline couplings are often used in high-performance vehicles, aeronautics, and many other applications. However, the mechanical benefits of splines are not immediately obvious. Listed below are the benefits of spline couplings. We’ll discuss what these advantages mean for you. Read on to discover how these couplings work.

Disc brake mounting interfaces are splined

There are 2 common disc brake mounting interfaces – splined and six-bolt. Splined rotors fit on splined hubs; six-bolt rotors will need an adapter to fit on six-bolt hubs. The six-bolt method is easier to maintain and may be preferred by many cyclists. If you’re thinking of installing a disc brake system, it is important to know how to choose the right splined and center lock interfaces.
splineshaft

Aerospace applications

The splines used for spline coupling in aircraft are highly complex. While some previous researches have addressed the design of splines, few publications have tackled the problem of misaligned spline coupling. Nevertheless, the accurate results we obtained were obtained using dedicated simulation tools, which are not commercially available. Nevertheless, such tools can provide a useful reference for our approach. It would be beneficial if designers could use simple tools for evaluating contact pressure peaks. Our analytical approach makes it possible to find answers to such questions.
The design of a spline coupling for aerospace applications must be accurate to minimize weight and prevent failure mechanisms. In addition to weight reduction, it is necessary to minimize fretting fatigue. The pressure distribution on the spline coupling teeth is a significant factor in determining its fretting fatigue. Therefore, we use analytical and experimental methods to examine the contact pressure distribution in the axial direction of spline couplings.
The teeth of a spline coupling can be categorized by the type of engagement they provide. This study investigates the position of resultant contact forces in the teeth of a spline coupling when applied to pitch diameter. Using FEM models, numerical results are generated for nominal and parallel offset misalignments. The axial tooth profile determines the behavior of the coupling component and its ability to resist wear. Angular misalignment is also a concern, causing misalignment.
In order to assess wear damage of a spline coupling, we must take into consideration the impact of fretting on the components. This wear is caused by relative motion between the teeth that engage them. The misalignment may be caused by vibrations, cyclical tooth deflection, or angular misalignment. The result of this analysis may help designers improve their spline coupling designs and develop improved performance.
CZPT polyimide, an abrasion-resistant polymer, is a popular choice for high-temperature spline couplings. This material reduces friction and wear, provides a low friction surface, and has a low wear rate. Furthermore, it offers up to 50 times the life of metal on metal spline connections. For these reasons, it is important to choose the right material for your spline coupling.
splineshaft

High-performance vehicles

A spline coupler is a device used to connect splined shafts. A typical spline coupler resembles a short pipe with splines on either end. There are 2 basic types of spline coupling: single and dual spline. One type attaches to a drive shaft, while the other attaches to the gearbox. While spline couplings are typically used in racing, they’re also used for performance problems.
The key challenge in spline couplings is to determine the optimal dimension of spline joints. This is difficult because no commercial codes allow the simulation of misaligned joints, which can destroy components. This article presents analytical approaches to estimating contact pressures in spline connections. The results are comparable with numerical approaches but require special codes to accurately model the coupling operation. This research highlights several important issues and aims to make the application of spline couplings in high-performance vehicles easier.
The stiffness of spline assemblies can be calculated using tooth-like structures. Such splines can be incorporated into the spline joint to produce global stiffness for torsional vibration analysis. Bearing reactions are calculated for a certain level of misalignment. This information can be used to design bearing dimensions and correct misalignment. There are 3 types of spline couplings.
Major diameter fit splines are made with tightly controlled outside diameters. This close fit provides concentricity transfer from the male to the female spline. The teeth of the male spline usually have chamfered tips and clearance with fillet radii. These splines are often manufactured from billet steel or aluminum. These materials are renowned for their strength and uniform grain created by the forging process. ANSI and DIN design manuals define classes of fit.
splineshaft

Disc brake mounting interfaces

A spline coupling for disc brake mounting interfaces is a type of hub-to-brake-disc mount. It is a highly durable coupling mechanism that reduces heat transfer from the disc to the axle hub. The mounting arrangement also isolates the axle hub from direct contact with the disc. It is also designed to minimize the amount of vehicle downtime and maintenance required to maintain proper alignment.
Disc brakes typically have substantial metal-to-metal contact with axle hub splines. The discs are held in place on the hub by intermediate inserts. This metal-to-metal contact also aids in the transfer of brake heat from the brake disc to the axle hub. Spline coupling for disc brake mounting interfaces comprises a mounting ring that is either a threaded or non-threaded spline.
During drag brake experiments, perforated friction blocks filled with various additive materials are introduced. The materials included include Cu-based powder metallurgy material, a composite material, and a Mn-Cu damping alloy. The filling material affects the braking interface’s wear behavior and friction-induced vibration characteristics. Different filling materials produce different types of wear debris and have different wear evolutions. They also differ in their surface morphology.
Disc brake couplings are usually made of 2 different types. The plain and HD versions are interchangeable. The plain version is the simplest to install, while the HD version has multiple components. The two-piece couplings are often installed at the same time, but with different mounting interfaces. You should make sure to purchase the appropriate coupling for your vehicle. These interfaces are a vital component of your vehicle and must be installed correctly for proper operation.
Disc brakes use disc-to-hub elements that help locate the forces and displace them to the rim. These elements are typically made of stainless steel, which increases the cost of manufacturing the disc brake mounting interface. Despite their benefits, however, the high braking force loads they endure are hard on the materials. Moreover, excessive heat transferred to the intermediate elements can adversely affect the fatigue life and long-term strength of the brake system.

China wholesaler China SWC Cardan Shaft with Free Design CustomChina wholesaler China SWC Cardan Shaft with Free Design Custom

China factory SWC Cardan Shaft for Skew Rolling Mill with Great quality

Product Description

Who we are?
HangZhou XIHU (WEST LAKE) DIS. CARDANSHAFT CO;LTD has 15 years history.;When the general manager Mr.;Rony Du graduated from the university,;he always concentrated his attention on the research and development,;production and sales of the cardan shaft.;Mr.;Rony Du and his team started from scratch,;from 1 lathe and a very small order,;step by step to grow up.;He often said to his team”We will only do 1 thing well——to make the perfect cardan shaft”.;

HangZhou XIHU (WEST LAKE) DIS. CARDANSHAFT CO.;,;LTD was founded in 2005.;The registered capital is 8 million ,;covers an area of 15 acres,; has 30 existing staff.; The company specializing in the production of SWC,; SWP cross universal coupling and drum tooth coupling.;The company with factory is located in the beautiful coast of Tai Lake –Hudai (HangZhou Economic Development Zone Hudai Industrial Park);.;
In order to become China’s leading cardan shaft one-stop solution expert supplier .;XIHU (WEST LAKE) DIS. CARDANSHAFT independent research and development of SWC light,; medium,; short,; heavy Designs cardan shaft have reached the leading domestic level.;Products not only supporting domestic large and medium-sized customers,; but also exported to the United States,; India,; Vietnam,; Laos,; Ukraine,; Russia,; Germany,; Britain and other countries and areas.;In the past 15 years,; the company has accumulated a wealth of experience,; learn from foreign advanced technology,; and to absorb and use the universal axis has been improved several times,; so that the structure is maturing,; significantly improved performance.;

XIHU (WEST LAKE) DIS. belief:; “Continuous innovation,; optimize the structure,; perseverance” to create a high quality of outstanding cardan shaft manufacturer.;We always adhere to the ISO9001 quality control system,; from the details to start,; standardize the production process,; and to achieve processing equipment “specialization,; numerical control” rapid increase in product quality.;This Not only won the majority of customers reputation,; but also access to peer recognition.; We continue to strive to pursue:; “for customers to create the greatest value,; for the staff to build the best platform”,; will be CZPT to achieve customer and business mutually beneficial CZPT situation.;

                                

Why choose us?
First,;select raw material carefully
 
  The cross is the core component of cardan shaft,;so the selection of material is particularly critical.;Raw materials of the cross for light Duty Size and Medium Duty Size,;we choose the 20CrMnTi special gear steel bar from SHAGANG GROUP.;Being forged in 2500 ton friction press to ensure internal metallurgical structure,;inspecting the geometric dimensions of each part to meet the drawing requirements,;then transfer to machining,;the processes of milling,; turning,; quenching and grinding.;
 
The inspector will screen blank yoke head.;The porosity,; cracks,; slag,; etc.; do not meet the requirements of the casting foundry are all eliminated,;then doing physical and chemical analysis,; to see whether the ingredients meet the requirements,; unqualified re-elimination.;And then transferred to the quenching and tempering heat treatment,; once again check the hardness to see if meet the requirements,; qualified to be transferred to the machining process.; We control from the source of the material to ensure the supply of raw materials qualified rate of 99%.;
 
  
 Second,;advanced production equipment
 
XIHU (WEST LAKE) DIS. Company introduced four-axis linkage machining center made in ZheJiang ,; milling the keyway and flange bolt hole of the flange yoke,; The once machine-shaping ensures that the symmetry of the keyway and the position of the bolt hole are less than 0.;02mm,;which greatly improves the installation accuracy of the flange,;the 4 axis milling and drilling center holes of the cross are integrated,;to ensure that the 4 shaft symmetry and verticality are less than 0.;02mm,;the process of the journal cross assembly service life can be increased by 30%,; and the speed at 1000 rpm above the cardan shaft running smoothly and super life is crucial to the operation.;
 
We use CNC machine to lathe flange yoke and welded yoke,;CNC machine can not only ensure the accuracy of the flange connection with the mouth,; but also improve the flange surface finish.;
 
5 meters automatic welding machine welding spline sleeve and tube,;welded yoke and tube.;With the welding CZPT swing mechanism,; automatic lifting mechanism,; adjustment mechanism and welding CZPT cooling system,; welding machine can realize multi ring continuous welding,; each coil current and voltage can be preset,; arc starting and stopping control PLC procedures,; reliable welding quality,; the weld bead is smooth and beautiful,; to control the welding process with fixed procedures,; greatly reducing the uncertainty of human during welding,; greatly improve the welding effect.;
 
 
High speed cardan shaft needs to do dynamic balance test before leaving the factory.;Unbalanced cardan shaft will produce excessive centrifugal force at high speed and reduce the service life of the bearing;the dynamic balance test can eliminate the uneven distribution of the casting weight and the mass distribution of the whole assembly;Through the experiment to achieve the design of the required balance quality,; improve the universal shaft service life.;In 2008 the company introduced 2 high-precision dynamic balance test bench,; the maximum speed can reach 4000 rev / min,; the balance of G0.;8 accuracy,; balance weight 2kg–1000kg.;
 
In order to make the paint standardization,; in 2009 the company bought 10 meters of clean paint room ,; the surface treatment of cardan shaft is more standardized,; paint fastness is more rugged,; staff’s working conditions improved,; exhaust of harmless treatment.;
 
Third,;Professional transport packaging
 
 The packing of the export cardan shaft is all in the same way as the plywood wooden box,; and then it is firmly secured with the iron sheet,; so as to avoid the damage caused by the complicated situation in the long-distance transportation.; Meet the standard requirements of plywood boxes into Europe and other countries,; no matter where can successfully reach all the country’s ports.;
 
 
The following table for SWC Medium-sized Universal Shaft Parameters.; 
Designs

Data and Sizes of SWC Series Universal Joint Couplings

pe Design
Data
Item		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg); 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1571 1130 1340 1400 1520
M(kg); 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg); 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg); 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg); 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m); 16 22.;4 31.;5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m); 8 11.;2 16 20 31.;5 40 45 63 90 125 180 250 355 500
  Β(°); 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9); 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.;0 7.;0 9.;0 9.;0 12.;5 12.;5 12.;5 15.;0 16.;0 18.;0 20.;0 22.;5 22.;5 25
  MI(Kg); 2.;57 3 3.;85 3.;85 5.;17 6 6.;75 8.;25 10.;6 13 18.;50 23.;75 29.;12 38.;08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm); 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

1.; Notations:; 
L=Standard length,; or compressed length for designs with length compensation; 
LV=Length compensation; 
M=Weight; 
Tn=Nominal torque(Yield torque 50% over Tn);; 
TF=Fatigue torque,; I.; E.; Permissible torque as determined according to the fatigue strength
Under reversing loads; 
Β=Maximum deflection angle; 
MI=weight per 100mm tube
2.; Millimeters are used as measurement units except where noted; 
3.; Please consult us for customizations regarding length,; length compensation and
Flange connections.; 
(DIN or SAT etc.; );
 

How to Calculate Stiffness, Centering Force, Wear and Fatigue Failure of Spline Couplings

There are various types of spline couplings. These couplings have several important properties. These properties are: Stiffness, Involute splines, Misalignment, Wear and fatigue failure. To understand how these characteristics relate to spline couplings, read this article. It will give you the necessary knowledge to determine which type of coupling best suits your needs. Keeping in mind that spline couplings are usually spherical in shape, they are made of steel.
splineshaft

Involute splines

An effective side interference condition minimizes gear misalignment. When 2 splines are coupled with no spline misalignment, the maximum tensile root stress shifts to the left by 5 mm. A linear lead variation, which results from multiple connections along the length of the spline contact, increases the effective clearance or interference by a given percentage. This type of misalignment is undesirable for coupling high-speed equipment.
Involute splines are often used in gearboxes. These splines transmit high torque, and are better able to distribute load among multiple teeth throughout the coupling circumference. The involute profile and lead errors are related to the spacing between spline teeth and keyways. For coupling applications, industry practices use splines with 25 to 50-percent of spline teeth engaged. This load distribution is more uniform than that of conventional single-key couplings.
To determine the optimal tooth engagement for an involved spline coupling, Xiangzhen Xue and colleagues used a computer model to simulate the stress applied to the splines. The results from this study showed that a “permissible” Ruiz parameter should be used in coupling. By predicting the amount of wear and tear on a crowned spline, the researchers could accurately predict how much damage the components will sustain during the coupling process.
There are several ways to determine the optimal pressure angle for an involute spline. Involute splines are commonly measured using a pressure angle of 30 degrees. Similar to gears, involute splines are typically tested through a measurement over pins. This involves inserting specific-sized wires between gear teeth and measuring the distance between them. This method can tell whether the gear has a proper tooth profile.
The spline system shown in Figure 1 illustrates a vibration model. This simulation allows the user to understand how involute splines are used in coupling. The vibration model shows 4 concentrated mass blocks that represent the prime mover, the internal spline, and the load. It is important to note that the meshing deformation function represents the forces acting on these 3 components.
splineshaft

Stiffness of coupling

The calculation of stiffness of a spline coupling involves the measurement of its tooth engagement. In the following, we analyze the stiffness of a spline coupling with various types of teeth using 2 different methods. Direct inversion and blockwise inversion both reduce CPU time for stiffness calculation. However, they require evaluation submatrices. Here, we discuss the differences between these 2 methods.
The analytical model for spline couplings is derived in the second section. In the third section, the calculation process is explained in detail. We then validate this model against the FE method. Finally, we discuss the influence of stiffness nonlinearity on the rotor dynamics. Finally, we discuss the advantages and disadvantages of each method. We present a simple yet effective method for estimating the lateral stiffness of spline couplings.
The numerical calculation of the spline coupling is based on the semi-analytical spline load distribution model. This method involves refined contact grids and updating the compliance matrix at each iteration. Hence, it consumes significant computational time. Further, it is difficult to apply this method to the dynamic analysis of a rotor. This method has its own limitations and should be used only when the spline coupling is fully investigated.
The meshing force is the force generated by a misaligned spline coupling. It is related to the spline thickness and the transmitting torque of the rotor. The meshing force is also related to the dynamic vibration displacement. The result obtained from the meshing force analysis is given in Figures 7, 8, and 9.
The analysis presented in this paper aims to investigate the stiffness of spline couplings with a misaligned spline. Although the results of previous studies were accurate, some issues remained. For example, the misalignment of the spline may cause contact damages. The aim of this article is to investigate the problems associated with misaligned spline couplings and propose an analytical approach for estimating the contact pressure in a spline connection. We also compare our results to those obtained by pure numerical approaches.

Misalignment

To determine the centering force, the effective pressure angle must be known. Using the effective pressure angle, the centering force is calculated based on the maximum axial and radial loads and updated Dudley misalignment factors. The centering force is the maximum axial force that can be transmitted by friction. Several published misalignment factors are also included in the calculation. A new method is presented in this paper that considers the cam effect in the normal force.
In this new method, the stiffness along the spline joint can be integrated to obtain a global stiffness that is applicable to torsional vibration analysis. The stiffness of bearings can also be calculated at given levels of misalignment, allowing for accurate estimation of bearing dimensions. It is advisable to check the stiffness of bearings at all times to ensure that they are properly sized and aligned.
A misalignment in a spline coupling can result in wear or even failure. This is caused by an incorrectly aligned pitch profile. This problem is often overlooked, as the teeth are in contact throughout the involute profile. This causes the load to not be evenly distributed along the contact line. Consequently, it is important to consider the effect of misalignment on the contact force on the teeth of the spline coupling.
The centre of the male spline in Figure 2 is superposed on the female spline. The alignment meshing distances are also identical. Hence, the meshing force curves will change according to the dynamic vibration displacement. It is necessary to know the parameters of a spline coupling before implementing it. In this paper, the model for misalignment is presented for spline couplings and the related parameters.
Using a self-made spline coupling test rig, the effects of misalignment on a spline coupling are studied. In contrast to the typical spline coupling, misalignment in a spline coupling causes fretting wear at a specific position on the tooth surface. This is a leading cause of failure in these types of couplings.
splineshaft

Wear and fatigue failure

The failure of a spline coupling due to wear and fatigue is determined by the first occurrence of tooth wear and shaft misalignment. Standard design methods do not account for wear damage and assess the fatigue life with big approximations. Experimental investigations have been conducted to assess wear and fatigue damage in spline couplings. The tests were conducted on a dedicated test rig and special device connected to a standard fatigue machine. The working parameters such as torque, misalignment angle, and axial distance have been varied in order to measure fatigue damage. Over dimensioning has also been assessed.
During fatigue and wear, mechanical sliding takes place between the external and internal splines and results in catastrophic failure. The lack of literature on the wear and fatigue of spline couplings in aero-engines may be due to the lack of data on the coupling’s application. Wear and fatigue failure in splines depends on a number of factors, including the material pair, geometry, and lubrication conditions.
The analysis of spline couplings shows that over-dimensioning is common and leads to different damages in the system. Some of the major damages are wear, fretting, corrosion, and teeth fatigue. Noise problems have also been observed in industrial settings. However, it is difficult to evaluate the contact behavior of spline couplings, and numerical simulations are often hampered by the use of specific codes and the boundary element method.
The failure of a spline gear coupling was caused by fatigue, and the fracture initiated at the bottom corner radius of the keyway. The keyway and splines had been overloaded beyond their yield strength, and significant yielding was observed in the spline gear teeth. A fracture ring of non-standard alloy steel exhibited a sharp corner radius, which was a significant stress raiser.
Several components were studied to determine their life span. These components include the spline shaft, the sealing bolt, and the graphite ring. Each of these components has its own set of design parameters. However, there are similarities in the distributions of these components. Wear and fatigue failure of spline couplings can be attributed to a combination of the 3 factors. A failure mode is often defined as a non-linear distribution of stresses and strains.

China factory SWC Cardan Shaft for Skew Rolling Mill with Great qualityChina factory SWC Cardan Shaft for Skew Rolling Mill with Great quality

China OEM New SWC Light Duty Size Cardan Drive Shaft for Industrial Equipments near me shop

Guarantee: 1 a long time
Applicable Industries: Production Plant, Equipment Repair Retailers, Food & Beverage Manufacturing unit, Printing Outlets, Development works , Vitality & Mining, Oil subject, The paper mill, Metal mills, The development web site
Customized support: OEM, ODM, OBM
Composition: Universal
Adaptable or Rigid: Flexible
Regular or Nonstandard: Nonstandard
Content: Metal, Steel, 45# metal
Item Name:: Cardan Shaft
Body Content:: Steel
Delivery Time:: Depend on Your Quantity
Fitment: Direct Alternative
Application: Rolling mill, lifting equipment, building machinery
MOQ: one
Payment Terms: L/C T/T Western Union
Process: Forging
Duration Compensation:: Telescoped
Packaging Details: 1, Regular export packing2, According to consumers request3, Neutral packing
Port: ZheJiang port/HangZhou port/ZheJiang port

About merchandise price and parameters：The over show is a tiny number of merchandise reference parameters, coupling sequence item installation size (axle hole diameter and length) can be customized according to customer demand from customers, as a result, the exact quotation must be based mostly on each and every get product specifications, measurement, amount, packaging demands and other details certain quotation.If you require an correct quotation, remember to click on the text to deliver an inquiry or speak to customer services right.We will provide you with a one particular-to-1 provider. Why Choose Us one.ProfessionalismWe have our possess manufacturing facility and have been engaged in the gear travel shaft industry for far more than 10 many years. We have created quite a few improved and regular car areas/industrial universal couplings, and we have extremely rich encounter.two.contentStringent choice of uncooked materials, each product is produced of higher-good quality cast metal to improve merchandise daily lifethree.toolsAssembly line automated creation equipment to meet any needs of clientsfour.serviceFor each and every of your buy orders, there will be a committed man or woman to keep track of the generation process from your viewpoint and place examine the product good quality. five.Get-acquireWe usually adhere to the company plan of good quality 1st and services first. I feel that choosing us will not permit you down. Product Paramenters The cardan shaft connects 2 shafts in various mechanisms (the driving shaft and the driven shaft),Mechanical elements that rotate jointly to transmit torque.In the large speed and hefty load energy transmission, some couplings also have the purpose of buffering, damping and strengthening the dynamic efficiency of shafting..Cross shaft common coupling is a big quantity of universal coupling.The main big difference in between a number of (SWP, SWC, SWZ, and so forth.) massive cross shaft universal coupling is the adjust of bearing seat and crosshead, forming diverse structural kinds.In practical application, the most generally employed is the double connection type of welded or bolted flange. The variation of the center length can just take a assortment of forms. In accordance to the dimension of the transmitted torque, it can be divided into weighty universal coupling, medium universal coupling, gentle universal coupling and little universal coupling.1. Weighty common coupling is usually used in metallurgical equipment, reduction equipment box planetary gearbox BWD6 hefty machinery (rolling mill equipment, metal rollingequipment) Equipment, rubber, plastic cement gear, papermaking products, wind electrical power products, ship), petroleum machinery, construction machinery, lifting and transportation machinery, and so forth.（popular type）2. Medium and light bodyweight common coupling is typically utilized in vehicles, equipment tools and other cars and gentle industrial equipment.（Different versions in the automotive sector have their own special cross shaft common couplings or other universal couplings.Agricultural machinery, industrial machinery and other sports machinery products also have specific common coupling, lifting most of the cross shaft common coupling）3. Modest common coupling is mainly utilised for transmitting motion.Typically used in precision equipment and handle mechanisms.（popular type） SWC integral forkhead cross shaft universal couplingScope of software:SWC sort universal coupling is primarily utilised for metal rolling equipment, lifting transport machinery and other weighty equipment, connecting 2 different axes of the transmission shaft program.Its rotary diameter is a hundred-620mm, the transmission rated torque is 1.25-1000KN.m, and the bending Angle of the axis is 15°-25°.Structural functions:1. Reasonable framework, safe and reliable use, the use of integral fork head, remove the bolt compression bearing seat (go over)weak links, completely keep away from typical bolt loose or crack brought on by malignant harm events, services existence than other kinds of coupling thirty%-fifty%2. Substantial carrying capacity3. The transmission efficiency is up to 98.7%-99.9%, which can reduce the electricity use by 5%-15% when utilised in higher-electricity transmission4. Easy transmission, low noise, general sounds is thirty-40dB(A)Type:SWC sort common coupling is divided into BH, BF, DH, CH, WH, WF and WD 7 varieties TypeNameBHStandard versatile welded sort TypeNameBFStandard flexible flange type TypeNameDHStandard adaptable welding type TypeNameCHLong versatile welding variety TypeNameWHNo flexible welding variety TypeNameWFNo adaptable flange kind TypeNameWDNo adaptable limited sort 型号回转直径D MM公称转矩Tn KN.m疲劳转矩Tn KN.m轴线折角 ß伸缩量LsMML minD1(js11)D2(H7)D3SWC100BH1001.250.63≤2555390845760SWC120BH1202.51.25≤25804851571570SWC150BH15052.5≤258059013 0571 9SWC180BH18012.56.3≤251057115515714SWC225BH2254571≤15140920196135152SWC250BH25 0571 1.5≤151457135218150168SWC285BH2859045≤ 293521351 Rubber Automobile Areas Travel shaft Centre Bearing for CZPT 151401195715170194SWC315BH31512563≤151401315280185219SWC350BH35018090≤15150141571210267SWC390BH395710125≤151701590345235267SWC440BH44571180≤151901875395715325SWC490BH490505710≤151901985435275325SWC550BH55 0571 71≤152457100492320426 Merchandise materials introduction：Content :(uncooked materials) is divided into :45 metal, 45 cast steel,40 chromium solid iron,(commonly employed 45 metal, we can also decide on diverse raw components according to diverse client requirements),(forty five # steel is a variety of substantial quality carbon structural metal, corresponding to S45C Japanese standard, American standard :1045, German standard C45.In contrast with regular A3 metal, it has larger power and resistance to deformation.）Part cross common joint:Cross cardan typically belong to a part of the universal shaft is the most weak, is also the most susceptible to harm the components, cross shaft element supplies and processing technological innovation is various, lead to the high quality level is not regular, our factory provide cross gimbal employing 20 crmnti materials, through the stringent inspection, multi needle, significantly bettering the dress in resistance and toughness need,In comparison with industry items, the service life has been improved.And the placement of the cross shaft refueling nozzle is hassle-free for refueling, which can make certain that the grease enters the bearing easily when refueling.Help save fear, preserve effort, for every single decision of our customers to supply certain goods. Comparison of uncooked materials：Select certified higher high quality raw material forty five# steel, forging a body forming, durable45 # steel is a sort of large high quality carbon structural steel, corresponding to S45C Japanese standard, American common :1045,German standard C45.In comparison with regular A3 steel, it has larger power and resistance to deformation. The importance of processing technologies :(comparison of processing technologies)The elements themselves are solid and thickened to enhance put on resistance and extend services life.CNC machining turning in strict accordance with the specifications of the drawings, not blindly go after beautiful, overlook the size of the solution alone. Comparison of assembiy details：In addition to pursuing the top quality of the solution alone, we increase the splendor of the product in the welding aspect, and the automatic welding method presents excellent performs of art Comparison of completed products：From chosen high high quality round metal,Resolutely eradicate the selection of mixed spherical metal doped with great or bad– Forging and thickening– integral molding parts– CNC machining in stringent accordance with the drawings– Computerized process welding– the perfect completed merchandise,Every hyperlink, Manufacturing unit Value Width 6mm Aluminum Alloy Timing Belt Pulley we are striving to do for you, select us, rest certain, fear, peace of thoughts. About various parameters of the solution, please explain to us the merchandise you need, we can in accordance to the merchandise technical specs you offer, on the dimensions, amount, personalized creation for you, to meet your any needsWe will give a 1 to 1 service for you to formulate the most cost-effective merchandise quotation, Make sure you click on listed here to contact us！ Our Benefits 1. We provide over a thousand diverse spare parts for a vast variety of rolling mill, paper equipment, textile machine, mining equipment,crane, pipe welding device and other hefty duty equipment.2.Elastomer connecting in the middle3.Can absorb vibration, compensates for radial, axial and angular deviation4.Oil resistance and electrical insulation5.Have the exact same characteristic of clockwise and anticlockwise rotationOur business materials different varieties of goods. Substantial high quality and reasonable price. We stick to the principle of “quality initial,support very first, ongoing enhancement and innovation to satisfy the clients” for the administration and “zero defect, zero issues”as the quality objective. To best our support, we give the products with excellent quality at the realistic price. 1.What is the MOQ for every products?A:We acknowledge 1 piece every bime. 2.Could we source samples? A:We supply samples,but the samples should be paid. 3.What is our shipping approaches? A:By sea,air,land. 4.What is the supply time? A:Sampies(Retails):7-15working days B:Bulk Order：30-40working days 5.What are your conditions of payment? A:T/T30%as deposit,and 70% before delivery or L/C with a 30% deposit.We’ll show you the photosof the merchandise and packages beforeyou par the balance. 6.Can you do OEM? And what is your min buy ? A:Indeed,we can do it.In common,our min purchase is 1 set.Most of our products are custom-made.Each and every order from our factory,we alwaysproduce cardan shaft following client verified the drawing.So we didn’ Manufacturing facility Wholesale Vehicle Parts Vehicle Part Axle Shaft Rear Entrance Drive Shafts For CZPT Honda CZPT Nissan Mazda Suzuki t have inventory.And because we are dependent on final customerconfirmed drawings manufacturing,so ahead of this,buyer has any demands can be modified.

What is a drive shaft?

If you observe a clicking sound whilst driving, it is most likely the driveshaft. An skilled car mechanic will be capable to explain to you if the sound is coming from equally sides or from one particular side. If it only transpires on one particular facet, you must check out it. If you observe sounds on each sides, you need to speak to a mechanic. In both scenario, a alternative driveshaft should be simple to uncover.
air-compressor

The push shaft is a mechanical portion

A driveshaft is a mechanical system that transmits rotation and torque from the motor to the wheels of the motor vehicle. This element is important to the operation of any driveline, as the mechanical electricity from the engine is transmitted to the PTO (power get-off) shaft, which hydraulically transmits that energy to linked equipment. Distinct travel shafts include different combos of joints to compensate for alterations in shaft length and angle. Some varieties of drive shafts consist of connecting shafts, internal constant velocity joints, and external mounted joints. They also incorporate anti-lock program rings and torsional dampers to avert overloading the axle or causing the wheels to lock.
Though driveshafts are comparatively light, they require to deal with a whole lot of torque. Torque utilized to the push shaft generates torsional and shear stresses. Due to the fact they have to withstand torque, these shafts are developed to be light-weight and have small inertia or weight. Consequently, they normally have a joint, coupling or rod amongst the two areas. Components can also be bent to accommodate changes in the length among them.
The travel shaft can be manufactured from a assortment of materials. The most frequent content for these parts is steel, although alloy steels are typically utilised for high-power apps. Alloy metal, chromium or vanadium are other materials that can be used. The variety of content utilised depends on the application and measurement of the component. In a lot of instances, steel driveshafts are the most durable and most affordable selection. Plastic shafts are utilised for light responsibility purposes and have different torque ranges than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electrical motor, transmission, and differential. Each and every section performs a specific work. In a rear-wheel travel automobile, the power created by the engine is transmitted to the rear tires. This arrangement improves braking and managing. The differential controls how considerably electrical power each and every wheel receives. The torque of the engine is transferred to the wheels according to its velocity.
The transmission transfers electricity from the engine to the wheels. It is also named “transgender”. Its work is to ensure electricity is shipped to the wheels. Electric vehicles can not travel by themselves and need a gearbox to push forward. It also controls how much energy reaches the wheels at any provided second. The transmission is the final part of the electrical power transmission chain. In spite of its several names, the transmission is the most sophisticated element of a car’s powertrain.
The driveshaft is a lengthy steel tube that transmits mechanical energy from the transmission to the wheels. Cardan joints connect to the generate shaft and supply flexible pivot factors. The differential assembly is mounted on the travel shaft, making it possible for the wheels to flip at different speeds. The differential enables the wheels to switch at different speeds and is quite important when cornering. Axles are also essential to the overall performance of the car.

It has a rubber boot that shields it from dust and dampness

To maintain this boot in excellent situation, you need to cleanse it with cold h2o and a rag. Never place it in the dryer or in immediate daylight. Heat can deteriorate the rubber and cause it to shrink or crack. To extend the lifestyle of your rubber boots, apply rubber conditioner to them routinely. Indigenous peoples in the Amazon area collect latex sap from the bark of rubber trees. Then they put their toes on the hearth to solidify the sap.
air-compressor

it has a U-shaped connector

The push shaft has a U-joint that transfers rotational power from the motor to the axle. Defective gimbal joints can lead to vibrations when the vehicle is in movement. This vibration is frequently mistaken for a wheel equilibrium dilemma. Wheel stability troubles can trigger the automobile to vibrate even though driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and cease when the vehicle is stopped.
The drive shaft is related to the transmission and differential utilizing a U-joint. It makes it possible for for tiny modifications in situation among the two elements. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also enables the drive shaft to be linked unconstrained, allowing the automobile to transfer. Its major goal is to transmit electrical power. Of all sorts of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints must be inspected at least two times a calendar year, and the joints must be greased. When examining the U-joint, you need to listen to a uninteresting sound when modifying gears. A clicking seem implies inadequate grease in the bearing. If you hear or really feel vibrations when shifting gears, you may require to service the bearings to prolong their life.

it has a slide-in tube

The telescopic style is a contemporary different to conventional driveshaft patterns. This progressive design and style is primarily based on an unconventional design philosophy that combines improvements in materials science and production processes. For that reason, they are a lot more efficient and lighter than standard styles. Slide-in tubes are a easy and efficient style answer for any car software. Listed here are some of its rewards. Read on to find out why this variety of shaft is excellent for a lot of applications.
The telescopic drive shaft is an critical component of the conventional auto transmission system. These driveshafts let linear motion of the two factors, transmitting torque and rotation all through the vehicle’s driveline. They also take up energy if the vehicle collides. Typically referred to as foldable driveshafts, their recognition is directly dependent on the evolution of the automotive market.
air-compressor

It uses a bearing press to exchange worn or damaged U-joints

A bearing press is a unit that employs a rotary press mechanism to install or eliminate worn or damaged U-joints from a drive shaft. With this device, you can replace worn or broken U-joints in your automobile with relative ease. The initial stage entails putting the travel shaft in the vise. Then, use the eleven/16″ socket to press the other cup in considerably adequate to install the clips. If the cups do not suit, you can use a bearing push to eliminate them and repeat the approach. Following removing the U-joint, use a grease nipple Make sure the new grease nipple is put in correctly.
Worn or ruined U-joints are a significant supply of driveshaft failure. If one particular of them ended up destroyed or ruined, the complete driveshaft could dislocate and the car would get rid of power. Unless you have a professional mechanic performing the repairs, you will have to replace the entire driveshaft. Thankfully, there are many approaches to do this oneself.
If any of these warning indicators show up on your automobile, you ought to take into account changing the destroyed or worn U-joint. Frequent signs of destroyed U-joints contain rattling or periodic squeaking when transferring, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these signs and symptoms, just take your automobile to a competent mechanic for a entire inspection. Neglecting to exchange a worn or damaged u-joint on the driveshaft can outcome in costly and harmful repairs and can trigger important damage to your car.

China OEM New SWC Light Duty Size Cardan Drive Shaft for Industrial Equipments near me shop China OEM New SWC Light Duty Size Cardan Drive Shaft for Industrial Equipments near me shop